Specifications
Manufacturing
- Foam, Strip-plank Construction on Male Frames
- Bead and Cove Planks 80kg/cu.m. 20mm thick, X-linked PVC Foam
- Entire Keel and full length of hull bottom reinforced with 20oz Kevlar
- Bulkheads and all panels vacuum bagged on full length reference surface
- Forward portion of wingdeck constructed of 100kg/cu.m. 30mm thick foam with 36oz Triaxial skins
- In-house Light-weight Teak cabinetry with solid surface counters. In-house installation of electrical, plumbing, Air Conditioning systems all done using ABYC guidelines and standards.
- Frequent weighing of boat (on calibrated electronic load cells) to ensure design parameters are being maintained.
| Design | Malcolm Tennant Multihull Design, New Zealand. |
|---|---|
| LOA | 18.3m (63 ft.) |
| Beam | 7.8m (25 ft.) |
| Draft | 1.1m (3.6 ft.) |
| Top Speed | 24 knots |
| Cruise Speed | 18/20 knots |
| Range | 1000 miles |
| Engines | Yanmar 350HP Turbo Diesel x 2 |
|---|---|
| Generator | 12 KW Fisher Panda x 2 |
| Fuel | 1,000 gallons |
| Water | 200 gallons |
| Water Maker | 625 Gal per day |